LUCHTFILTER MIKUNI HSR42

Plaats rek 1

7.62 CM VOETSTEUN VERLENGINGS PLAAT, zonder schakelstang en remleiding

nieuwprijs compleet 248 €

chroom velg - 16 x 300- met 1 remschijfmontage

HAND GUARDS voor FX LO PRO -BLACK

merk Memphis Shades

HAND GUARDS voor FXLR -BLACK

merk Memphis Shades

1602-0868

LEVER SHIFT INNER 82-19 FLT

1602-1040

D07-0342GB

REAR CHR SHIFT LEVER SHIFTER PEG

* harley : Touring / electra glide / Roadking

MOUNT ISO HD 1/4 X 1/4

FALCON, SPC BELT. 1" WIDE X 137T

Carbon fiber reinforced. For stock Sportster with 30/29-68 drive ratio and 32-70 Touring drive ratio.

Fits: > 07-08(NU)Touring; 07-22 XL1200 models; 11-22 XL883 models; 2007(NU)XL50; 08-12(NU)XR1200

CHROME SPACERS

1/4" I.D. X 7/16" O.D. X 3/4

462F-RM

2 OHM 6.5" FRONT SPEAKERS W FLH GRILLS 14+ MODELS

• Gen 4 features Improved bass and clarity over Gen 3 models
• Black speaker cone for better cosmetics when supplied grill is used
• 125 watt RMS/200 peak watts
• Custom-tooled speaker basket requires no cutting or grinding for install
• Include very clean-looking, sturdy metal mesh grilles with no corporate logos
• Supplied FLHT-style metal mesh or factory grilles can be used

S&S, VELOCITY STACK, E/G CARB. 4" LONG

Polished aluminum S&S Air horn. Fits all S&S Super E & G carburetors. Offers uncompromised airflow for strip & Dyno. Not recommended for regular street use since no filter element is present. Comes complete with 3 mounting screws.

Fits: > S&S Super E & G carburetors

SPRING K/S CHR 07-22ST

JIFFY RETURN SPRING, CHROME

OEM replacement reference 50005-85A.

Fits: > 85-06 Softail; 91-94 FXR; 91-98 FLT; 86-22 XL; 95-06 Buell; 02-17 V-Rod (NU)

JIFFY RETURN SPRING. BLACK

Kick stand return spring. OEM style reproduction of 49725-07A.

Fits: > 07-21 Softail; 07-21 Touring

JIFFY RETURN SPRING, CHROME

Fits: > 02-17 Dyna

RUBBER, JIFFY BUMPER

RUBBER

Fits: > 07-17 Softail (excl. 13-17 FXSB Breakout) (NU)

RUBBER, JIFFY BUMPER

OEM style replacement bumper for the side stand.

Fits: > 18-21 Softail; 07-21 Touring

NFC DIGITAL IGNITION SWITCH 40A-RELAY

merk MOTOGADGET

The mo.lock NFC is a contact free digital ignition lock and substitutes mechanical ignition locks or their electrical switching feature respectively.

The associated digital key/transponder unlocks when the mo-lock NFC is approached (switching distance approx. 40 mm) and the ignition is switched on or off - completely contact free.

The mo.lock NFC is based on the latest NFC technology (Near Field Communication) and therefore, unlike e.g. radio remote controls, extremely tamper-proof.

Each key/transponder has a unique digital code. Only the right digital code unlocks the mo.lock. Key and mo.lock are absolutely free of mechanical wear.

The mo.lock switches an automotive relay with a possible load of up to 40 A - sufficient power for every on-board system.

The hidden mounting of the small mo.lock, covered by non-metallic parts like e.g. a plastic side panel, permits completely removing the mechanic ignition lock. Clean look and various design possibilities are guaranteed - especially for custom bikes!

The two keys have the size of a key-chain and can be used for switching and learning new keys. A maximum of 125 keys can be learned to each mo.lock NFC. Additional keys can be purchased with us.

The mo-lock NFC has a LED on the front which indicates different status by colour. To protect the battery the standby current in switched-off mode is only 3,2 mA, reduces to 1,5 mA after 16hrs und after 8 days to 0,75 mA.

67778-60

67778-60a

Replacement part for use in the FL headlamp housing.

Fits: > 60-84 FL, FLH models (NU)

zijnummerplaathouder

For EU 143x210mm sized license plates. Polished aluminum. On-axle side mount, fits with 1" (24.5mm) wheel axles. With LED LargeLight license plate illumination.

Fits: > 08-17 Softail (NU)

13" rubber antenne

voor Harley: touring model -1985-2013

hidden antenna

Merk Kuryakyn

NEOPRENE WELL NUT, 1/4-20 THREADED

RCKR NUT 66-84BT 57-84XL

M8 X 10MM BUTTONHEAD BOLT, STAINLESS

COLONY OVERSIZE PLUG AND TAP KIT

CHROME; DOMED HEX; 9/16-18 PLUG. USED TO REPAIR 1/2-18 DRAINPLUG HOLES

Fits: > 38-99 B.T. (excl. 1999 Twin Cam); 52-03 K XL; 38-73 45" Flathead (NU)

DRAINPLUG, TRANSM. / OIL TANK/ PRIM.

Hex allen; zinc plated; magnetic; 1/2-20 thread

Fits: > Oil tank: 00-17 Softail(1). Transmission: 00-17 Softail(1). Transmission/oil pan: 18-23 Softail(2); 01-17 Dyna(2); 01-23 FLT/Touring(2). Primary: 07-17 Dyna(1); 07-23 Softail(1); 07-23 Touring(1); 09-23 Trikes(1); 04-22 XL(1).

Luchtfilter montage HARDWARE KIT FLT TC 8-9 Arlen ness Big Sucker

05-61129

STUDS EXHAUST 84-19 BT/TC

RETAINING RINGS

For clutch retainer 501455, kickstarter pivot shaft, starter shaft, inner shifter lever/shaft, cam chain tensioners.

Fits: > Cam chain tensioner: 99-06 Twin Cam. Kickstarter arm pivot pin: 71-84 FX; 65-73 FL. Shifter fork shaft, ratchet top transmission: 36-E79 B.T. Inner shifter lever/shaft: 65-73 FL; 91-03 5-speed XL.

259010

DS530611

17-0611-HC3

SHFT BRKT BUSHING 94-17 FLST

RETAINING RING, DETENT ARM TRANSMISSION

Fits: > 91-03 5-speed XL (NU)

TORSION SPRING, TRANSMISSION SHIFTER ARM

Fits: > 91-03 5-speed XL (NU)

33031-80

80-86 4-SPD

A-35840-SET

A-35809-58

11000101

SEAL SHIFT SHFT MILW8

Shift Shaft Seal

• 85-06 Touring, 87-06 Softail, 91-05 Dyna, 85-94 FX Model, 80-84 FLT, 81-84 FLTC, 82-84 FXR, 82-84 FXRS, 83-84 FXRT, 84 FXRSDG
• Ultima 5 and 6-speed Transmission

INT SEAL .062 BLUE90-17TC

O-RING CLUTHC CABLE

Clutch cable 1988-up

Used in transmission end cover. Fits models with mechanical actuated clutch and models with hydraulic master cylinder.

Fits: > 87-23 Softail; 91-17(NU)Dyna; 87-13 & 21-23 FLT/Touring; 14-16(NU)FLHR/C; 88-22(NU)XL; 08-12(NU)XR1200. Models with mechanical actuated clutch

KEIHIN CARB FLOAT VALVE

Float needle, 1978-2006 Keihin Butterfly & CV

03-0024

SEAL F.PUMP 02-7FLT VITON

MCS, EXTENSIVE CARB REBUILD KIT KEIHIN BUTTERFLY

Extensive rebuild kit for all OEM Keihin carburetor variations as used on XL Sportster and Big Twin models.

Fits: > 76-89 B.T.; 76-87 XL. With OEM Keihin butterfly carburetor. (NU)

MIKUNI REBUILD KIT, HSR42/45

MIKUNI HSR42/45 CARBS; WITH NEEDLE VALVE ASSY, O-RINGS, GASKETS & SCREWS

EFI IDLE CONTROL ALU

• 06-17 Dyna, 06-15 Softail, 06-07 Touring

26995-86-A

KUR9977

660342

Transmission End Cover Gasket

25244-99-K

JAMES GASKET, BAJONET GAS CAP. THICK

C9764

C9664

16775-99

12052-A

25416-06-F

Camshaft Change Chain Drive Kit

CAM KIT INSTAL 07-17CHAIN

742397

DS173228

TRANSMISSION GASKET & SEAL KIT 80-99 5SP

• 85-92 FX Model, 87-92 Softail, 85-92 Touring, 84 FLT, 84 FLTC, 84 FXRS, 84 FXRSDG, 84 FXRT
• Except E84 Models

35652-79-A

gasket transmission bearing cover

80-985SPD

 60567-90

JAMES, OIL PUMP GASKET & SEAL KIT. XL SPORTSTER. RCM

With RCM (Rubber Coated Metal) gasket. Incl. snap ring and pump cover o-ring.

Fits: > 91-22 XL (excl. 08-12 XR1200) (NU)

DAMAGE CONTROL KIT 1" CHROME

ims Damage Control engine failure detection system provides an early warning of catastrophic engine failure by detecting ferrous debris within an engine's oiling system. Using state of the art technology, the special drain plug monitors ferrous particles in the motor oil. When the amount of particles in the oil reaches a level that could indicate impending trouble, the LED warning light illuminates in the handlebar clamp, alerting you to investigate the trouble. This early warning can potentially save you a load in repair costs. The system includes a complete wiring harness, drain plug sensor, and your choice of black anodize or chrome handlebar LED & clamp housing for 1" handlebars. The Jims Damage Control kit installs easily with no cutting or splicing on all 1993 to present Touring and 1991 to present Dyna Glide models. Kits for use on 1 1/4" diameter handlebars are available upon Special Order.

DAMAGE CONTROL KIT 1" zwart

ims Damage Control engine failure detection system provides an early warning of catastrophic engine failure by detecting ferrous debris within an engine's oiling system. Using state of the art technology, the special drain plug monitors ferrous particles in the motor oil. When the amount of particles in the oil reaches a level that could indicate impending trouble, the LED warning light illuminates in the handlebar clamp, alerting you to investigate the trouble. This early warning can potentially save you a load in repair costs. The system includes a complete wiring harness, drain plug sensor, and your choice of black anodize or chrome handlebar LED & clamp housing for 1" handlebars. The Jims Damage Control kit installs easily with no cutting or splicing on all 1993 to present Touring and 1991 to present Dyna Glide models. Kits for use on 1 1/4" diameter handlebars are available upon Special Order.

NM-33472-2001

CONN MOLX 72500-07BK20PIN

Extended 4.8" Handlebar wiring kit 96-up

Color-coded 48" long wiring harness kit. Ideal for repairs or when the original wiring is too short to mount your Ape hanger. To take the guess out of your work these wires are identical color coded as OEM equipment. Fits all 1996 thru 2006 models, except those with radio controls.

• High-reliability 12V voltage regulators feature rugged aluminum alloy construction
• Provide accurately regulated voltage under all electrical loads, have no relay contacts to wear or become maladjusted and are environmentally sealed for protection against moisture and shock

hard wire Super Load Equalizer LEQ (front signals only)

sofail 11- up, dyna 12-up, sportster/ dyna/ softail/ roadking/ roadglide/ streetglide/ electra glide 14-up

Merk Badlands

Badlands' new Turn Signal Command Kit allows you to activate your turn signals by just pushing the button once, NOT holding it down. Your turn signals will flash approximately 9 seconds, with the option to cancel manually. If more time is required you simply reactivate the system by pushing the button again. Badlands' Command Kit features a built-in flasher relay, and built-in Load Equalizer to operate turn signals from as low as LEDs to up-to 100 Watts per side, as well as an integrated Emergency Flasher. So when you are tired of struggling to hold in your turn signal button, pull in your clutch, operate your throttle and apply your front brake all while making a turn, then the Command Kit is the answer. Also great as a direct replacement for your old broken OEM canceller or when you have removed or replaced your OEM speedo.

Hard-Wire ATS Self cancelling turnsignal module

sportster 73-91, FX 73-89, FL 73-86 or any custom motorcycle

Merk Badlands

Badlands' new Turn Signal Command Kit allows you to activate your turn signals by just pushing the button once, NOT holding it down. Your turn signals will flash approximately 9 seconds, with the option to cancel manually. If more time is required you simply reactivate the system by pushing the button again. Badlands' Command Kit features a built-in flasher relay, and built-in Load Equalizer to operate turn signals from as low as LEDs to up-to 100 Watts per side, as well as an integrated Emergency Flasher. So when you are tired of struggling to hold in your turn signal button, pull in your clutch, operate your throttle and apply your front brake all while making a turn, then the Command Kit is the answer. Also great as a direct replacement for your old broken OEM canceller or when you have removed or replaced your OEM speedo.

Plug-n-Play self cancelling Module

8 positions fem.

voor 94-99/00 modellen

merk Badlands

Badlands' new Turn Signal Command Kit allows you to activate your turn signals by just pushing the button once, NOT holding it down. Your turn signals will flash approximately 9 seconds, with the option to cancel manually. If more time is required you simply reactivate the system by pushing the button again. Badlands' Command Kit features a built-in flasher relay, and built-in Load Equalizer to operate turn signals from as low as LEDs to up-to 100 Watts per side, as well as an integrated Emergency Flasher. So when you are tired of struggling to hold in your turn signal button, pull in your clutch, operate your throttle and apply your front brake all while making a turn, then the Command Kit is the answer. Also great as a direct replacement for your old broken OEM canceller or when you have removed or replaced your OEM speedo.

Accel single fire super coil

• 71-03 Sportster, (except 98-03 XL1200S), 70-84 FL Shovel, 71-84 FX Shovel, 85-94 FX Model, 91-98 Dyna, 84-99 Softail, 85-98 Touring
• Carburetor models only

This ‘Super Coil’ is just as powerful as the original. Makes for a perfect replacement or upgrade and will bolt right on with no modifications to your bracket. Fits all Big Twin and Sportster models (except Twin Cam models or fuel injected models) with aftermarket single fire ignitions from 65-06. Comes in black and ‘Accel Yellow’.

FX style ignition switch 'Thin', round key. Chrome

With regular 'flat' key. 3-Way system. Off/On/On with lights. The 'thin style' housing offers excellent installation options in custom applications. OEM style replacement for 71441-94.

Fits: > 77-93 FX, FXR; 77-11 XL; 08-11 XR1200(NU)

96-UP IGNITION SWITCH, SIDE HINGE TYPE. CHROME

Hinge type ignition switch with round keys for models with classic style gas tank mounted instrument panels.

Fits: > 96-10 Softail; 93-11 FXDWG; 08-11 FXDB/C/F/L; 94-13 FLHR/C (NU)

With Skull type cap. Hinge type ignition switch with round keys for models with classic style gas tank mounted instrument panels.

Fits: > 96-10 Softail; 93-11 FXDWG; 08-11 FXDB/C/F/L; 94-13 FLHR/C

Hinge type ignition switch with round keys for models with classic style gas tank mounted instrument panels. OEM replacement reference 71517-11, 71517-11A.

Fits: > 11-15(NU)FXST; 11-17(NU)FLST/C/F/N, FLS/S; 14-22(NU)FLHR/C; 17-23 FLHRXS; 13-17(NU)FXDWG, FXDB; 15-23 FLRT Freewheeler

SH-V4

SH-UO1

speedohealer voor moto's.

Omzetten van miles naar km.

HANDLEBAR WIRE HARNESS CONTROL KIT +8"

Used to extend the wiring harness when longer or wider than stock handlebars are installed. Note: Turn signal wiring extension kit must be separately purchased, when required.

Fits: > 07-10 H-D with cruise control (NU)

31489-79b

31526-81b

STANDARD CO., SOLENOID (DUAL BRACKET). CHROME

Starter solenoid for 5 speed models.

Fits: > 80-88 FLT, FXR 5-Speed models (excl. 5-speed Softail) (NU)

DIRECT STARTER BUTTON IMPORT

Replaces the stock end cover on the solenoid. By pushing the button on the Direct-Starter Cap you will activate the starter motor directly on the starter motor itself. Can be used as main (no additional starter knobs required) or as back-up of the stock starter system. The ultimate clean look. Note: Will not fit Spyke Stealth starters.

Fits: > 90-06 B.T. (excl. 2006 Dyna); 91-04 XL1200; 95-22 all XL and 08-12 XR1200 (NU)

302059-BC204

electronic indicator relais 10-200 watt

These electronic flasher units are a must when using aftermarket indicator lights. This unit takes over where the OEM unit gives up and does not flash anymore. It will work with any combination of indicators, mini markers, whisker lights etc. with a power draw minimum 10 Watt and a maximum of 200 Watt.

OIL PRESSURE SWITCH

Fits 1977-2022 XL & XR Sportster and 1995-2010 air cooled Buell (OEM 26554-77B)

CVP oxygen sensor exhaust

Replica style replacement O2 sensor. Fits rear.

Fits: > 12-17(NU)Softail; 12-17(NU)Dyna; 13-17(NU)V-Rod; 14-22 XL; 15-20 Street XG750/750A/500. Rear

CVP, OXYGEN SENSOR EXHAUST. OEM STYLE

Replica style replacement O2 sensor. Fits front.

Fits: > 12-17 Softail; 12-17 Dyna; 13-17 V-Rod. Front (NU)

CVP, CYLINDER HEAD TEMPERATURE SENSOR

Replacement cylinder head temperature sensor. Injection models only. Also fits S&S motors with IST ignition system.

Fits: > 01-17 Softail inj.; 04-17 Dyna inj.; 99-16 FLT/Touring inj. (NU). S&S TC & SSW+ with S&S IST ign. (excl.. S&S EVO engines); 07-08 S&S X-Wedge engines

TEMPERATURE / MANIFOLD AIR PRESSURE (MAP) SENSOR

Used on manifold. Includes o-ring. Measures both temperature and air pressure. OEM replacement reference 32700065. Note: See 510717 James / 561325 Cometic for replacement o-ring.

Fits: > 18-23 Softail; 17-23 Touring; 17-23 Trikes

CVP, TEMPERATURE / MANIFOLD AIR PRESSURE (MAP) SENSOR

In throttle body assembly/manifold. Measures both temperature and air pressure.

Fits: > 16-17 Softail; 08-16 FLT/Touring; 07-22 XL; 08-12 XR1200 (NU)

789393

789394

49716-08B

50126-08B

98.50

98.50

STANDARD CO., BANJO BOLT WITH BRAKE LIGHT SWITCH

Zinc plated reproduction of the stock banjo bolt with incorporated hydraulic brake light switch. Fits rear brake reservoir.

Fits: > 08-17 Dyna (NU)

dash panel cover die cast sculped

Harley softail, FLST, FLSTS, FXST, dyna, FXDWG

Black Hard saddlebag bag latch cover face

voor Harley Touring, glide 1993-2013

Gauges Bezels Horn Cover Tachometer Speedometer

for harley davidson

CHROME CALIPER INSERT FR & R

Chrome plated with self adhesive backing for front and rear calipers. Installs in seconds.

Fits: > 00-23 various H-D models

Derby Timer Timing Covers Black

voor Harley Dyna FLHR Road King Softail FLD

front axle nut cover bolt kit

voor: Harley: Dyna, touring, trike - 2008-up

CNC deep cut front axle cap nut cover

CNC deep cut front Axle nut bolt cover voor harley Touring-softail-FLHT-COV

chromé

Oil cooler cover - zwart

voor: Touring/Electra Glide / Road Glide / Street Glide van 2011-2015

Replacement for OEM style starter motors. Note: Must re-use stock starter shaft.

Fits: > 06-17 Dyna; 07-17 Softail; 07-16 Touring (NU)

MÜLLER, POWER CLUTCH. RSD

For custom RSD (Right Side Drive) transmissions only. Installs in the transmission end cover. Reduces clutch pull length by 19% and reduces clutch effort by around 40%. For M8 models it offers 45-50% clutch effort reduction. A great solution for those in search for an easier to pull clutch. ABE approved.

Fits: > 87-09 B.T. with custom Right Side Drive (excl. hydraulic actuated clutch models) (NU)

M8 softail clutch pushrod made ine USA by Macomb County Choppers

Deze clutch pushrod van Macomb County Choppers USA, lost het probleem op  van de migratie van olie van de versnellingbak naar de primaire kast, bij de Harley Milwaukee M8 motoren

M8 touring clutch pushrod made ine USA by Macomb County Choppers

Deze clutch pushrod van Macomb County Choppers USA, lost het probleem op  van de migratie van olie van de versnellingbak naar de priamaire kast, bij de Harley Milwaukee M8 motoren

SPRING CLUTCH ADJUSTEMENT

148116

Clutch Hub

voor Harley Big Twin 1998-2006 behalve dyna 2006

extra friction plate & steel plate kit 84-90 XL

merk Barnett

PLATES ORGANIC 98-17 BT

extra friction plate & steel plate kit Big Twin 2011-2016

merk Barnett

CLUTCH HUB INNER

Fits: > 98-06 B.T. (EXCL 2006 DYNA)(NU)

 79-E84 XL

255580

58-90XL

Primary (Outer) Cam Chain for Twin Cam

COMPENSATING SPROCKET 34T

Fits: > 06-11 DYNA; 07-11 SOFTAIL (EXCL. ROCKERS); 07-10 TOURING (NU)

88459

JIMS TAPPET BIG TWIN 54-84

1807

18538-99B

TAPPET JIMS POWERGLIDE II

TWIN CAM 99 - PRESENT & SPORTSTER 2000-PRESENT & buell 2000-2010 except 1125R

gascap set with lock.

Voor Harley with screw in gascaps 1996-2013

gas cap locking 96-2017 vented

ROTOR FRT S/S 14- 22 FLT

Custom Brake Master Cylinder Assembly Without switch kit Chrome 5/8" 1" Single Disc

72-03 Sportster, 85-94 FX Model, (except 90-93 FXRSSP, 90-93, 96-98 FXRS_CON, 90-92 FXRT), 91-05 Dyna, (except 93-00 FXDL, 94-95 FXDS_CON, 99-03 FXDX, 99 FXRS_CONV, 01-03 FXDXT, 04-05 FXDXI), 84-05 Softail, 72-84 FX Shovel, 72-84 FL Shovel, (except 80-84 FLT, 81-84 FLTC)

B16-0938

 07-0540-S

Straight Upper Fork Cover Black Gloss Powder Coated 49MM

• 06-17 Dyna, (except 06 FXDWGI, 07-08, 10-12, 14-17 FXDWG, 12, 14-16 FLD, 13 FLD103, 13 FXDWG103)

54656-97a/b/c

54662-02a

REPLACEMENT DUST BOOTS FOR TOURING AIR SHOCKS

Replacement rubber dust boot for the rear shock absorber for Touring models. Was never available from H-D as a replacement item.

Fits: > 97-13 Touring (NU)

Seal front tube plug

FRK CAP SEAL 48-17 41MM

Lower vented leg fairing + 6.5" speaker box pods

Harley touring FLHTCU 14-17

Outer fairing

Harley street electra glide ultra classic 2014-2017

speedometer cover cowl front upper inner fairing

street glide 2014-2015

0505-1201

BL1415

UNIBAR 04-19 XL BLACK

merk Lindby Custom

• Made from high-quality 1-1/4" high-tensile steel tubing
• Easy installation with included hardware
• Not recommended for use with extended forward controls or extended floorboards